Circulating Water Dosing Device

Circulating water dosing device

Process Principle

The working principle of a circulating water chemical dosing system: During natural operation, industrial circulating cooling systems are prone to scaling or corrosion due to the combined effects of factors such as the hardness, alkalinity, pH value, concentration ratio, temperature, and ambient humidity of the circulating water. Both of these factors negatively impact the safety and operational efficiency of the circulating cooling system. To inhibit scaling or corrosion, corrosion inhibitors or scale inhibitors must be artificially added to the water. Commonly used corrosion inhibitors and scale inhibitors include polyphosphates, zinc salts, polycarboxylate salts, and phosphonates, etc.

Overview of the circulating water dosing system process

This device mainly includes a drug solution preparation system. , metering and dosing system , Four parts: safety system and control system . Solid reagents are added to the dissolving tank. , Then according to proportion Add industrial water and stir to dissolve. , The pesticide is dispensed to the dosing point by a metering and dosing system. . Dosing control can be performed manually. , Alternatively, it can be based on the control signals output by the host system. , It can be controlled automatically to add the feed.

Ordering Information for Circulating Water Dosing Systems:

1. order purchase Tie Unification for Several box Several pump ;

2. Is the metering pump a plunger pump or a diaphragm pump?

3. Metering pump flow rate and pressure

4. Department Unification yes hand move control system return It is self move control system

Application areas

Industrial circulating water, air conditioning water treatment, municipal water supply and drainage

Data parameters